接鏈環受力分析與結構優化

link chain
    Analyzing the Strength and Optimizing the Structure of the Link Chain 
    接鏈環受力分析與結構優化
短句來源
    The chain transmission is widely applied to the mining transporting equipment, the link chain is the core that the whole equipment works normally.
    鏈傳動廣泛地應用在采礦運輸設備中,接鏈環是整個設備正常工作的核心。
短句來源
    Base on the elasticity contact and deformation theory, study the contact load and deformation of the pin and the link chain.
    運用彈性接觸和變形協調理論,研究銷與接鏈環的接觸受力及其形變。
短句來源
    Taking 30×108 link chaion of the mining flat type with arc tooth for model when it is loaded the up most pulling force, calculating the connecting strength that of the link chain, analyzing the strength situation of he link chain.
    對30×108礦用弧形梯齒扁平接鏈環在承受最大拉力的情況下進行分析,算出接鏈環所受到的力,分析接鏈環的受力情況。 



    The article makes a three-dimensional analysis of the flat type connector units for mining round link chain in static load on the condition of thinking about stage nonlinear of the structure by using big collegiate finite element analysis software—ANSYS, and the structural Von miss stress distribution of ladder tooth connector units is calculated by finite element method, and then the understanding with the distributed of the stress of the joggling teeth may have very big function to guarantee the connector units with reasonable configuration .
    應用大型有限元分析軟件ANSYS對梯齒形扁平接鏈環在承受靜載荷的狀態下,進行了基于考慮結構接觸非線性的三維有限元分析,初步計算了梯齒型結構扁平接鏈環的應力分布情況,而了解齒型接鏈環嚙合部位的應力分布情況,對于從設計角度來保證接鏈環具有合理的結構形式會有很大的作用。 
  
  chain connector
    The fracture analysis of φ30×108 chain connector 
    φ30×108接鏈環的疲勞斷裂分析 
  the link chain
    Analyzing the Strength and Optimizing the Structure of the Link Chain 
    接鏈環受力分析與結構優化 
    The chain transmission is widely applied to the mining transporting equipment, the link chain is the core that the whole equipment works normally.
    鏈傳動廣泛地應用在采礦運輸設備中,接鏈環是整個設備正常工作的核心。 
    Base on the elasticity contact and deformation theory, study the contact load and deformation of the pin and the link chain.
    運用彈性接觸和變形協調理論,研究銷與接鏈環的接觸受力及其形變。 
    Taking 30×108 link chaion of the mining flat type with arc tooth for model when it is loaded the up most pulling force, calculating the connecting strength that of the link chain, analyzing the strength situation of he link chain.
    對30×108礦用弧形梯齒扁平接鏈環在承受最大拉力的情況下進行分析,算出接鏈環所受到的力,分析接鏈環的受力情況。
短句來源
  connecting chain
    The manufacture of flat connecting chain used in mine of φ34×126 sawtooth 
    φ34×126矩齒型礦用圓環鏈用扁平接鏈環的研制